Equipment

Rolling Mills & Components

*Z-Mill, Cold Rolling, .250″ x 52″

Reference Number: 64416

Cold Mill, Temper Rolling, 12″ & 28″ x 58″

Reference Number: 63438

Gear Reducer, 750 HP, 650/1600 RPM

Reference Number: 63346

Gear Reducer, Mill Service, Rated 1750 HP, 4.10:1 Ratio, 225/450 RPM

Reference Number: 61295

Gear Reducer, Roller Bearing, 1000 HP

Reference Number: 62946

Hot Strip Mill, 26′ & 49″ x 48″

Reference Number: 63633

Mill Cold Rolling 20″ & 53″ x 66″ Four Stand Tandem Design

Reference Number: 64223

Mill Stand, 21″ & 56″ x 56″

Reference Number: 63908

Mill Stand, Four High, 20.5″ x 48″ x 66″

Reference Number: 64284

Mill Stands (2), Vertical, 45″

Reference Number: 64420

Mill Stands (6), Two High, 50″ x 85″

Reference Number: 64419

Mill Stands (7), Four High, 30″ x 62″ x 85″

Reference Number: 64417

Mill, Bar Finishing, H-V Design 14″ PD, w/Drive Assemblies

Reference Number: 64199

Mill, Blooming, 40″ x 96″

Reference Number: 63618

Mill, Cold Rolling 20″ x 62″ Two High Reversing, Non Ferrous, Unused

Reference Number: 64203

Mill, Cold Rolling, 11″ x 25″ x 24″

Reference Number: 64230

Mill, Cold Rolling, 26″ x 60″ x 80″

Reference Number: 64405

Mill, Cold Rolling, Four High Skin Pass, 19.5″ x 37.4″x 80″

Reference Number: 64408

Mill, Cold Rolling, Z-Mill .200″-.010″ x 24″-37″ x 33,000 Lbs

Reference Number: 61475

Mill, Four High Cold Rolling, 5″x18″x14″

Reference Number: 64361

Mill, Four High Temper, 26″ x 56″ x 80″

Reference Number: 64402

Mill, Heavy Bloom/Billets

Reference Number: 64406

Mill, Rod Rolling, Continuous Design

Reference Number: 64436

Mill, Rod/Wire Finishing Block (Coiled Product), .39-.79″ x 6,600lbs

Reference Number: 64381

Mill, Slabbing, 40″ x 96″

Reference Number: 64006

Morgardshammar Cross Country 3-Hi Four Stand Reversing Mill

Reference Number: 64468

Pinion Stand, 7,000 HP, 47.5″ PD

Reference Number: 63713

Pinion Stand, Two High, 21.5″ PD x 4,000HP

Reference Number: 64280

Pinion Stand, Two High, 38″ PD x 6000 HP

Reference Number: 63904

Pinion Stand/Gear Reducer, Combination Drive, 14.50″ PD

Reference Number: 64217

Rolling Mill, 29″ x 54″ Two-High Skin Pass Mill, Stainless Steel

Reference Number: 64209

Rolling Mill, Cold, 4 Stand, 18.25″ & 39.75″ x 52″

Reference Number: 63067

Tandem Mill, Cold, Four Stand, 21″ & 56″ x 56″

Reference Number: 63667

Z-Mill, Cold Rolling, .080″ x 8.5″

Reference Number: 64286

Z-Mill, Cold Rolling, .135″-32″

Reference Number: 63318

Sorry, no equipment was found matching your selection.